Healthcare

Dependant on dimensions these panel(s) are manufactured from Compact Grade Laminate, an impervious material that carries the manufacturer’s 10 year material warranty, and fitted with flush fitting, semi-recessed, hinged and lockable access doors. These panels will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the ‘TLS Slot & Secure’ fitting systems that are designed to fit into a wallboard, partition or wall situation. The panels are factory assembled, pre-plumbed, dry air tested, and will be fitted with the specified tap and the hot and/or cold water pipework as is necessary to connect to the building’s water supply services, such connections are to be carried out by others.

PLEASE NOTE

The specified Disposal Units and/or Clinical sinks and any electrical controls and associated electrical equipment are supplied on a ‘supply only’ basis for on-site fitting by others.

HBN 10 – Part C compliant and approved Category Components & Suppliers P21+/22 Programme

Manufactured as a one-piece unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged and lockable access doors. The units are fitted with anti-vandal measures such as reinforcement to the doors & hinges and, where appropriate, aluminium angle sections to any return ends. This unit is supplied for fitting with either the ‘TLS Tongue & Groove’ or ‘TLS Slot & Secure’ fitting systems that are designed to fit into a wallboard, partition or wall situation. The unit is factory assembled, pre-plumbed and dry air tested will be fitted with the specified basin, tap and hot and cold water supplies necessary to connect to the building’s water service, such connections to be carried out by others. Please note that any electrical controls and associated electrical equipment are supplied on a ‘supply only’ basis for on-site fitting by others.

IMPORTANT NOTE

Unfortunately we cannot guarantee protection against those intent on self-harm, but we consider that the design and materials used reduce the risk. Must be installed using Anti-Pick mastic sealant, supplied and fitted by others.

HBN 10 Part C Compliant and approved Category Components & Suppliers P21+22 Programme

Manufactured as a one piece panel unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This unit is fitted with anti-vandal measures such as reinforcement to the doors and hinges and, where appropriate, aluminium angle section to any return ends. This unit will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the TLS ‘Slot & secure systems’ that are designed to fit into a wallboard, partition or wall situations. The unit is factory assembled, pre-plumbed, and ‘dry air tested’, and will be fitted with the cold water pipework for connection to the buildings water supply and cistern such connections to be carried out by others. Please note the WC pan & Cistern and any electrical controls and associated electrical equipment specified are supplied on a supply only basis for on-site fitting by others.

IMPORTANT NOTE

Unfortunately we cannot guarantee protection against those intent on self-harm, but we consider that the design and materials used reduce the risk. Must be installed using Anti-Pick mastic sealant, supplied and fitted by others.

HBN 10 Part C compliant and approved Category Components & Suppliers P21+22 Programme

Manufactured as a ‘one-panel’ unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This unit will be supplied for fitting with either the TLS Tongue & Groove or the TLS Slot & Secure systems that are designed to fit into a wall board, partition or wall situation. The unit is factory assembled, pre-plumbed and dry air tested and will be fitted with specified basin and tap and the hot & cold water pipework necessary for the specified tap. Connection of the hot and cold water supplies and waste to the building`s services is to be carried out by others. Please note that any electrical controls and associated electrical equipment specified is supplied on a ‘supply only’ basis for on-site fitting by others.

• S0433 LH (S0435 RH) Contour 21+ 40cm back outlet washbasin, one  taphole & anti-microbial glaze
• A6791NU Markwik 21+ basin fixing kit for use with 1 taphole Contour21+ back outlet washbasins
• A6696AA Markwik 21+ one hole thermostatic basin mixer, single sequential lever, demountable body with copper tails, includes Bioguard & removable spout.
• A6791NU Markwik 21+ back to wall connecting kit for closed wash basins.

HBN10 Part C Compliant and approved Category Components & Suppliers P21+/22 Programme

Manufactured as a ‘one panel’ unit from Compact Grade Laminate, an impervious material that carries the manufacturer’s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This panel unit will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the ‘TLS Slot & Secure’ fixing systems that are designed to fit into a wallboard, partition or wall situation, as appropriate. This panel unit is factory assembled, pre-plumbed and ‘dry air’ tested and will be fitted with the cold water pipework necessary for connection to the building’s water supply and cistern, such connection to be carried out by others.

PLEASE NOTE

The WC pan, Cistern and any electrical controls and associated equipment specified are supplied on a ‘supply only’ basis for on-site fitting by others.

• WC Pan
• Cistern
• WC Seat
• WC Back Support
• WC Cushion
• Hinged Arm Support
• Grab Rails (4no)

HBN 10 Part C Compliant and Category Components & Suppliers P21+/22 Programme

Manufactured as a one piece unit from 10mm post forming grade compact grade laminate, an impervious material that carries the manufacturer`s 10 year material warranty, having post formed return ends, flush fitting and semi-recessed hinged & lockable access doors with  simple installation afforded by the `TLS Slot & Secure` fitting system. The unit is factory assembled, pre-plumbed and dry-air tested and will be fitted with the specified tap and the hot & cold water pipework necessary for the tap. The specified basin  to be supplied loose for on site fitting by others.  Connection of the hot & cold water supplies and waste to the building`s services is to be carried out by others.

PLEASE NOTE:

Any electrical controls and associated electrical equipment specified is supplied on a ‘supply only’ basis for on-site fitting by others.

• S043001 Contour 21+ 50cm back outlet washbasin, no tapholes, ant-splash & anti-microbial glaze
• S038667 Contour 21+ waste pack with Smartguard for wall/panel mounted basin
• S038867 Contour 21+ basin fixation set
• A6682AA Markwik21+ panel mounted thermostatic basin mixer, single sequential lever, demountable with removable spout.