30Jan

Disposal Units and Clinical Sink Panels

Description

Dependant on dimensions these panel(s) are manufactured from Compact Grade Laminate, an impervious material that carries the manufacturer’s 10 year material warranty, and fitted with flush fitting, semi-recessed, hinged and lockable access doors. These panels will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the ‘TLS Slot & Secure’ fitting systems that are designed to fit into a wallboard, partition or wall situation. The panels are factory assembled, pre-plumbed, dry air tested, and will be fitted with the specified tap and the hot and/or cold water pipework as is necessary to connect to the building’s water supply services, such connections are to be carried out by others.

PLEASE NOTE

The specified Disposal Units and/or Clinical sinks and any electrical controls and associated electrical equipment are supplied on a ‘supply only’ basis for on-site fitting by others.

HBN 10 – Part C compliant and approved Category Components & Suppliers P21+/22 Programme

Typical Situations

  • Dirty Utility Rooms
  • Clinical Sinks
  • Non-Clinical Sinks
  • Cleaners Rooms
  • Staff Kitchens
  • Janitorial Rooms
  • Scrub Up Troughs
  • Unassisted/Assisted Bath Rooms
  • Shower Rooms

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
30Jan

Prisoner Safe Cell & Mental Health – WHB Panel

Description

Manufactured as a one-piece unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged and lockable access doors. The units are fitted with anti-vandal measures such as reinforcement to the doors & hinges and, where appropriate, aluminium angle sections to any return ends. This unit is supplied for fitting with either the ‘TLS Tongue & Groove’ or ‘TLS Slot & Secure’ fitting systems that are designed to fit into a wallboard, partition or wall situation. The unit is factory assembled, pre-plumbed and dry air tested will be fitted with the specified basin, tap and hot and cold water supplies necessary to connect to the building’s water service, such connections to be carried out by others. Please note that any electrical controls and associated electrical equipment are supplied on a ‘supply only’ basis for on-site fitting by others.

IMPORTANT NOTE

Unfortunately we cannot guarantee protection against those intent on self-harm, but we consider that the design and materials used reduce the risk. Must be installed using Anti-Pick mastic sealant, supplied and fitted by others.

HBN 10 Part C Compliant and approved Category Components & Suppliers P21+22 Programme

Details

  • Wash Hand Basin
  • Tactile controls
  • Wave on controls

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
30Jan

Prisoner Safe Cell & Mental Health – WC Panel

Description

Manufactured as a one piece panel unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This unit is fitted with anti-vandal measures such as reinforcement to the doors and hinges and, where appropriate, aluminium angle section to any return ends. This unit will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the TLS ‘Slot & secure systems’ that are designed to fit into a wallboard, partition or wall situations. The unit is factory assembled, pre-plumbed, and ‘dry air tested’, and will be fitted with the cold water pipework for connection to the buildings water supply and cistern such connections to be carried out by others. Please note the WC pan & Cistern and any electrical controls and associated electrical equipment specified are supplied on a supply only basis for on-site fitting by others.

IMPORTANT NOTE

Unfortunately we cannot guarantee protection against those intent on self-harm, but we consider that the design and materials used reduce the risk. Must be installed using Anti-Pick mastic sealant, supplied and fitted by others.

HBN 10 Part C compliant and approved Category Components & Suppliers P21+22 Programme

Details

  • WC Pan
  • Cistern
  • Tactile Controls
  • Wave on controls

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
30Jan

Non-Clinical Wash Hand Panel (WHB PP)

Description

Manufactured as a ‘one-panel’ unit from Compact Grade Laminate, an impervious material that carries the manufacturer`s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This unit will be supplied for fitting with either the TLS Tongue & Groove or the TLS Slot & Secure systems that are designed to fit into a wall board, partition or wall situation. The unit is factory assembled, pre-plumbed and dry air tested and will be fitted with specified basin and tap and the hot & cold water pipework necessary for the specified tap. Connection of the hot and cold water supplies and waste to the building`s services is to be carried out by others. Please note that any electrical controls and associated electrical equipment specified is supplied on a ‘supply only’ basis for on-site fitting by others.

  • S0433 LH (S0435 RH) Contour 21+ 40cm back outlet washbasin, one  taphole & anti-microbial glaze
  • A6791NU Markwik 21+ basin fixing kit for use with 1 taphole Contour21+ back outlet washbasins
  • A6696AA Markwik 21+ one hole thermostatic basin mixer, single sequential lever, demountable body with copper tails, includes Bioguard & removable spout.
  • A6791NU Markwik 21+ back to wall connecting kit for closed wash basins.

HBN10 Part C Compliant and approved Category Components & Suppliers P21+/22 Programme

Typical Situations

  • Wheelchair Accessible WC
  • Ambulant, Semi-Ambulant WC
  • Patient Ward En-suite
  • Single Patient Room En-Suite
  • General Areas/ Domestic Services

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
30Jan

WC Panel

Description

Manufactured as a ‘one panel’ unit from Compact Grade Laminate, an impervious material that carries the manufacturer’s 10 year material warranty, fitted with flush fitting, semi-recessed, hinged & lockable access doors. This panel unit will be supplied for fitting with either the ‘TLS Tongue & Groove’ or the ‘TLS Slot & Secure’ fixing systems that are designed to fit into a wallboard, partition or wall situation, as appropriate. This panel unit is factory assembled, pre-plumbed and ‘dry air’ tested and will be fitted with the cold water pipework necessary for connection to the building’s water supply and cistern, such connection to be carried out by others.

PLEASE NOTE

The WC pan, Cistern and any electrical controls and associated equipment specified are supplied on a ‘supply only’ basis for on-site fitting by others.

  • WC Pan
  • Cistern
  • WC Seat
  • WC Back Support
  • WC Cushion
  • Hinged Arm Support
  • Grab Rails (4no)

HBN 10 Part C Compliant and Category Components & Suppliers P21+/22 Programme

Typical Situations

  • Wheelchair Accessible WC Room
  • Ambulant/Semi Ambulant WC Room
  • Patient Ward En-Suite
  • Single Patient Room En-Suite
  • General areas/Domestic Services

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
30Jan

Clinical Wash Hand Basin Station (WHB3)

Description

Manufactured as a one piece unit from 10mm post forming grade compact grade laminate, an impervious material that carries the manufacturer`s 10 year material warranty, having post formed return ends, flush fitting and semi-recessed hinged & lockable access doors with  simple installation afforded by the `TLS Slot & Secure` fitting system. The unit is factory assembled, pre-plumbed and dry-air tested and will be fitted with the specified tap and the hot & cold water pipework necessary for the tap. The specified basin  to be supplied loose for on site fitting by others.  Connection of the hot & cold water supplies and waste to the building`s services is to be carried out by others.

PLEASE NOTE:

Any electrical controls and associated electrical equipment specified is supplied on a ‘supply only’ basis for on-site fitting by others.

  • S043001 Contour 21+ 50cm back outlet washbasin, no tapholes, ant-splash & anti-microbial glaze
  • S038667 Contour 21+ waste pack with Smartguard for wall/panel mounted basin
  • S038867 Contour 21+ basin fixation set
  • A6682AA Markwik21+ panel mounted thermostatic basin mixer, single sequential lever, demountable with removable spout.

Typical Situations

  • Clinical Areas
  • Consulting Rooms

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
28Nov

General Fabrication

Description

General Fabrication – Total Laminate Systems offer a general fabrication service offering many different products into many different sectors –

  1. Worktops for the leisure and education markets
  2. High pressure laminate bonded sheets for the interior market
  3. Compact grade tops for the furniture and education markets
  4. Bespoke units for reception areas
  5. General fabrication service

Examples of some of our products below.

Waste paper bins for Mcdonalds and KFC

HPL laminated face with spray lacquered edges

PU edging to the HPL top, “armour edging is exactly that a hard wear PU edged top.”

Pigeon hole reception counter 

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
28Nov

Wall Panel Systems

Description

TLS simplicity wall panel systems are designed to make any feature wall stand out, we have many different designs and types of system to suit all budgets. Please find below our standard offers with example photos.

  • Simplicity wall line panels are 9-10mm thick laminate faced – all panels joints are T or h sections and include for all internal and external corners to ensure ease of cleaning. Available in 100’s of different colour options.
  • Simplicity fast clad wall panels are 19-20mm thick, they are in a single section backing board with the front mounted panels clipped to the backing board using ke ku clips.
  • Simplicity compact fast clad panels are 10mm compact grade laminate, this product is mechanically joined using T&G grooves a metal expansion clips. This is suitable for a wet or hardwearing area and comes in a range of colours.

For more information about any of our wall panel system please contact our office.

Simplicity Fast Clad Wall System

Simplicity Prebonded Flush System

Simplicity Compact Fast Clad Panel

Shock cubicles with Simplicity wall line panels to lime green wall.

Simplicity compact fast clad panels – no frames, seamless corners and T & G joints, 100% waterproof and made from compact grade laminate throughout.

Simplicity fast clad wall panels system with HPL panels to Heathrow Logistics Park

Simplicity fast clad panelling to a lift shaft surround in Heathrow for DNATA

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
28Nov

Lockers

Description

Lockers options – Total Laminate Systems offer many different locker options, these range as follows-

  • Metal Carcass with metal door – including plinth if required
  • Metal Carcass with compact door – including plinths if required
  • 100% compact locker – including plinths if required.

All of our lockers come with many different lock and colour options, please call the office for further information. Examples of lockers below.

100% compact grade lockers for ultimate lifecycle use and wet areas.

Metal Lockers with metal doors

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More
28Nov

Vanity Units

Description

We offer bespoke vanity units on all schemes – these include –

  • Inset 550-600 deep with unit under – available with drop skirts and upstands if required
  • Semi recessed 300-350 deep with unit under – available with drop skirts and upstands if required
  • Compact 10mm post formed drop skirt – limited colours available
  • 13mm compact engineered tops with plant on upstands and engineered dropskirts as standard – full colours available
  • Acrylic – LG Hi Macs, Corian and Hannex are 3 of many acrylic items we can offer.

Vanity Units Washrooms (Type 1)

Vanity Units Washrooms (Type 2)

Vanity Units Washrooms (Type 3)

Type 2 vanity unit – 600 deep x 200 drop skirt NO upstand with unit under in compact

Type 2  semi recessed vanity unit – 300 deep x 300 NO upstand with unit under in compact

Type 3 vanity unit 550 deep x 120 drop skirt and 75mm upstand and unit under

Type 2 semi recessed vanity top 300 x 300 with unit under

Corian tops with 810 undermounted basins with compact units under

Type 2 compact vanity

Our experts are at your disposal and happy to help

Get in touch with Total Laminate Systems and let us know how we can help you with your latest project
Read More

Accreditations / Certifications

All of our site installation teams are CSCS registered 100% they also have attended either the 2 or 5 day H&S awareness scheme's. Below are the list of professional accreditations / certifications we are also compliant with. Please click on each logo for further accreditation / certification information:
System Certification - BM Trada - ISO 9001 | UKAS Management Systems CHAS - Contractors Health and Safety Assessment Scheme - Accredited Contractor - www.chas.gov.uk Constructionline - A UK Government Certification Service FSC Worksafe Contractor Stackhouse Poland LG Hi-Macs